Dunlop MXR Ten Band EQ - M108S

---

The MXR Ten Band EQ lets you tune your bass or guitar rig in seconds, and it’s been upgraded with noise-reduction circuitry, true bypass switching, a lightweight aluminum housing, brighter LEDs, and a second output.

This pedal can be powered by the included ECB004 18-volt adapter or the DC Brick™, Iso-Brick™ and Mini Iso-Brick™ power supplies.

The MXR Ten Band EQ has been upgraded with noise-reduction circuitry, true bypass switching, a lightweight aluminum housing, brighter LEDs for increased visibility, and a second output so you can run two separate signal chains. With ten carefully chosen frequencies and both input and output level controls, the Ten Band EQ will let you tune your bass or guitar rig to any room in seconds—create earthshaking low-end; restore punch, level, and treble response to a crowded pedalboard; warm up an amplified acoustic; and much, much more. For ultimate tone-sculpting ability in a bullet-proof enclosure, put the Ten Band EQ on your pedalboard.

Controls

• VOLUME
• Slider controls overall effect volume
• EQ
• Sliders boost or attenuate up to ±18dB at six different frequency centers
• GAIN
• Slider controls amount of gain boost
• FOOTSWITCH
• Toggles effect on/bypass ( blue slider LEDs indicate on)

Specifications

• Input Impedance
• 470 kΩ
• Output Impedance
• 5 kΩ
• Max Input Level All Sliders at 0 dB
• +14 dBV at 1 kHz
• Max Output Level All Sliders at 0 dB
• +14 dBV at 1 kHz
• Frequency Response
• ±1 dB, 20 Hz to 20 kHz
• Noise Floor (A-weighted at 5.2Vrms)
• -101.4dBv
• Filtering ±12db at: 31.25, 62.5, 125, 50, 500, 1k, 2k, 4k, 8kHz
• ±12dB shelf at 16kHz
• Bypass
• True Hardwire
• Power Supply
• 18 Volts DC
• Current Draw
• 48 mA
• Power
• The Ten Band EQ is powered by an 18-volt AC adapter such as the included Dunlop ECB004 or the DC Brick™ and Iso-Brick™ power supplies

Model:	M108S
Manufacturer:	MXR